Deck Restoration, Sanding & Oiling In Southport

Deck Restoration, Sanding & Oiling Experts

Timber and composite decks for the Gold Coast - designed, built and finished with over 12 years of local experience

A tired, grey deck rarely needs replacing outright - most Gold Coast decks just need bringing back to life. Our restoration service revives sun-weathered and rain-worn timber decks across Southport, Burleigh Heads and the wider coast. We assess the boards and substructure first, replace any that have cupped, split or gone soft, then sand the surface back to fresh timber before re-oiling. Years of Queensland UV, humidity and salt strip the colour and finish from merbau, spotted gum and blackbutt, leaving them silvery and rough underfoot. We remove that weathered layer, re-secure loose or popped fixings, and finish with a quality decking oil chosen for your board species. The result is a deck that looks close to new, feels smooth for bare feet, and is protected again - though timber will always need periodic re-oiling to hold it.

GET A FREE QUOTE

Full Name *

Phone *

Short message about your needs *

I agree to terms & conditions provided by the company. By providing my phone number, I agree to receive text messages from the business.

Gold Coast Decking

What deck restoration actually involves

Restoration covers a spectrum, from a straightforward clean-and-recoat to a full sand-and-oil with board replacement. Where a deck is mostly sound but faded, we may only need to clean, lightly sand and re-oil to lift the colour. Where boards have greyed deeply, checked or grown furry with age, a full machine sand back to bare timber gives the best base. Hardwoods such as merbau, spotted gum, blackbutt and ironbark all restore well because there is dense timber to work with. Treated pine decks can be revived too, though the finish and grain differ. We talk you through what each level of work will and will not achieve before we start, so the expectation matches the deck you have.

Gold Coast Decking

How we sand, repair and re-oil

We begin by lifting and checking suspect boards and inspecting the joists and bearers beneath, because a soft board often points to a substructure problem worth catching early. Any framing repairs are carried out to AS1684 so the deck stays structurally sound. We replace damaged decking boards with matching or closest-available stock, then machine-sand the whole surface through progressively finer grits to remove the weathered layer. Popped nails and tired fixings are re-secured or upgraded, and near the coast we favour stainless or coastal-grade fixings that help reduce rust staining on the timber. Once the surface is clean, dry and dust-free, we apply decking oil suited to the species and exposure. Merbau and other tannin-rich timbers are managed so runoff does not stain surrounding surfaces.

Gold Coast Decking

Why Gold Coast homeowners trust our restoration

Gold Coast Decking has spent more than 12 years building and reviving timber decks across the coast and the northern rivers, so we know how local decks age and what brings them back. Every restoration starts with a free on-site measure and assessment and a fixed, itemised quote, so you know the scope and price before we lift a board. We are fully insured with $20 million public liability, and our own experienced team does the work rather than subcontracting it out. We are honest about when a deck is worth restoring and when replacement is the smarter spend, because a good outcome matters more to us than a bigger invoice. Any variations are agreed in writing. You get a straight answer, tidy work and a deck you are happy to walk on again.

Gold Coast Decking

What deck restoration costs

Restoration pricing depends on the deck size, how weathered the boards are, how many need replacing, the timber species and how easy the deck is to access. A clean-and-recoat on a sound deck sits at the lower end, while a full sand-and-oil with several replacement boards costs more because of the labour and materials involved. Elevated and multi-level decks take longer to set up safely, which also affects the figure. We give every price as a guide only until we have seen the deck, because a photo rarely tells the full story of what is under the surface. The accurate number always comes from the free on-site measure and quote. We itemise it so you can see exactly what you are paying for and adjust the scope if you need to.

Gold Coast Decking

Restore, or rebuild? How to decide

Restoration makes sense when the substructure is sound and the boards have life left in them - it is far cheaper than a rebuild and keeps a well-loved deck going for years. Once the joists or bearers are rotten or termite-damaged, or a large share of boards are failing, a rebuild usually gives better value than throwing good money at a poor frame. Some owners use restoration as the moment to switch a high-maintenance timber deck to capped composite, or to add a privacy screen or pergola while access is easy. We are happy to price both paths so you can compare. Whatever you choose, timber will keep needing periodic re-oiling, so we set realistic upkeep expectations either way. There is no maintenance-free deck, only ones looked after well.

Related Concreting Services

Composite Decking in Southport

Low-upkeep capped composite decks that resist rot, insects and greying, with no oiling needed. We give you the honest trade-off too: dearer upfront, hotter underfoot in full sun, and still not truly maintenance-free.

Rooftop & Alfresco Decks in Southport

Turn a roof, balcony or backyard into a year-round entertaining space. We build alfresco and rooftop decks across the Gold Coast, protecting the waterproof membrane below, using pedestals and lightweight coastal materials, and framing the view you bought the home for.

Timber Decking in Southport

Natural timber decks built for the Gold Coast climate, from treated pine to dense hardwood. Frames sized to AS1684, coastal-grade fixings near salt, and honest advice on the oiling timber needs to stay looking its best.

TESTIMONIALS

What Our Deck Restoration, Sanding & Oiling Customers Say About Us

The Process

3 Step Process For Your Deck Restoration, Sanding & Oiling Needs

Free measure, quote and design

We start with a free on-site visit to measure the space, check the levels and access, and talk through how you want to use the deck. From there we help you weigh timber against composite for your budget and upkeep, size the substructure to the load, and settle on board choice, layout and any privacy screens. You get a fixed, itemised quote for the agreed scope, so you know exactly what is included before we lift a tool.

Build the substructure and lay the boards

Once you approve the quote, we set the footings, posts, bearers and joists as a substructure framed to AS1684, with spans and spacing sized to your deck and boards. In high termite-pressure areas we build with treated or durable-class timber, or steel or composite framing, and use stainless or coastal-grade fixings near salt and canals. Then we lay your decking boards to a clean, even line, with concealed fasteners where the profile suits.

Finish, oil or seal and clean up

With the boards down, we complete the detailing, fit any handrails or privacy screens, and give timber decks their first oil or the boards a proper seal, depending on the material. We then clean up the site and leave it tidy, and walk you through how to look after your new deck so it stands up to the Gold Coast climate. For timber, that means an honest chat about cleaning and re-oiling over time.

Deck Restoration, Sanding & Oiling In Southport

FREQUENTLY ASKED QUESTIONS

Everything you need to know about our Deck Restoration, Sanding & Oiling In Southport

How often does a Gold Coast deck need re-oiling?

As a guide, most timber decks on the Gold Coast benefit from a clean and re-oil every one to two years, though heavily exposed decks facing full sun or salt-laden coastal air may need it sooner. Our year-round UV and summer humidity break down oil finishes faster than in cooler inland climates. We will suggest a realistic interval for your deck's aspect and timber. No oil lasts indefinitely, so treat re-oiling as ongoing upkeep rather than a one-off fix.

Can you save a deck that has gone completely grey?

In most cases, yes. Grey is usually just a weathered surface layer, and machine-sanding back to fresh timber removes it and reveals the colour underneath. As long as the boards are structurally sound and not badly cupped, split or rotten, sanding and re-oiling brings them back close to new. Where individual boards are too far gone, we replace those and blend them in. We will tell you honestly after inspecting whether restoration or partial replacement is the better call.

What if you find termite or rot damage during restoration?

Lifting boards sometimes reveals termite or moisture damage in the joists or bearers that was hidden from above, which is one reason a proper inspection matters. If we find it, we stop and show you, then quote any framing repairs separately so nothing is hidden. Repairs are carried out to AS1684 using treated or durable-class timber to reduce future risk, though no timber can be called termite-proof in a high-pressure region like ours. Catching it early during a restoration often saves a much larger bill later.

Can you restore and re-oil a pool deck?

Yes, pool decks are among the most common restorations we do, because chlorine, splashing water, sunscreen and constant bare-foot traffic wear the finish quickly. We sand back the tired boards, re-secure any that have lifted, and re-oil with a product suited to a wet, high-use poolside setting. Where the surface has become slippery, we can discuss non-slip options and cooler board choices if you are considering replacement down the track. We work around the pool barrier and do not alter or certify the pool fence itself, which stays the certifier's scope.

Do I need to replace all the boards or just some?

Often only some. On many decks the majority of boards sand and oil up well, and we only swap the ones that have split, cupped or gone soft. We source matching or closest-available boards so replacements blend in as much as possible, though brand-new timber may sit slightly different in colour until it weathers to match. Replacing selectively keeps the cost down while still giving you a sound, good-looking deck. We confirm the exact count in your itemised quote.

How long does a deck restoration take?

A typical single-level deck restoration takes a few days, depending on size, how much board replacement is needed and drying conditions between sanding and oiling. Humidity and rain on the Gold Coast can extend timelines, because oil needs a dry surface and settled weather to cure properly, and we would rather wait than trap moisture under the finish. Larger, elevated or multi-level decks take longer to set up and work safely. We give you a realistic schedule with your quote and keep you posted if the weather moves it.